Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 147
dhcp l2relay vlan
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
ProSafe Managed Switch dhcp l2relay vlan Use this command to enable the DHCP L2 Relay agent for a set of VLANs. All DHCP packets which arrive on interfaces in the configured VLAN are subject to L2 Relay processing. vlan-list range is 1-4093. Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros between the range. Use a dash (-) for the range. Default Format Mode disabled dhcp l2relay vlan Global Config no dhcp l2relay vlan Use this command to disable the DHCP L2 Relay agent for a set of VLANs. Format Mode no dhcp l2relay vlan Global Config dhcp l2relay trust Use this command to configure an interface or range of interfaces as trusted for Option-82 reception. Default Format Mode untrusted dhcp l2relay trust Interface Config no dhcp l2relay trust Use this command to configure an interface to the default untrusted for Option-82 reception. Format Mode no dhcp l2relay trust Interface Config show dhcp l2relay all Use this command to display the summary of DHCP L2 Relay configuration. Format Mode show dhcp l2relay all Privileged EXEC Example: The following shows example CLI display output for the command. (switch) #show dhcp l2relay all DHCP L2 Relay is Enabled. Interface L2RelayMode ---------- ----------- TrustMode Switching Commands 147