Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 579

ProSafe Managed Switch show clock Use the show clock command in Privileged EXEC or User EXEC mode to display the time and date from the system clock. Use the show clock detail command to show the time zone and summertime configuration. Format Mode show clock [detail] User EXEC Privileged EXEC Term Time Time Source Definition The time provided by the time source. The time source type. If option detail is specified, these terms are displayed Time Zone The time zone configured. Summer Time Indicate if the summer time is enabled. DHCP Server Commands This section describes the commands you to configure the DHCP server settings for the switch. DHCP uses UDP as its transport protocol and supports a number of features that facilitate in administration address allocations. ip dhcp pool This command configures a DHCP address pool name on a DHCP server and enters DHCP pool configuration mode. Default Format Mode none ip dhcp pool Global Config no ip dhcp pool This command removes the DHCP address pool. The name should be previously configured pool name. Format Mode no ip dhcp pool Global Config Utility Commands 579