Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 446

ProSafe Managed Switch Parameters Description hash-mask-length Length of a mask (32 bits maximum) that is to be ANDed with the group address before the hash function is called. All groups with the same seed hash correspond to the same RP. For example, if this value was 24, only the first 24 bits of the group addresses matter. This allows you to get one RP for multiple groups. priority Priority of the candidate BSR. The range is an integer from 0 to 255. The BSR with the larger priority is preferred. If the priority values are the same, the router with the larger IP address is the BSR. The default value is 0. interval (Optional) Indicates the BSR candidate advertisement interval. The range is from 1 to 16383 seconds. The default value is 60 seconds. no ipv6 pim bsr-candidate Use this command to disable the router to announce its candidacy as a bootstrap router (BSR). Format Mode no ipv6 pim bsr-candidate interface [ | vlan ] [hash-mask-length] [priority] Global Config ipv6 pim dr-priority Use this command to set the priority value for which a router is elected as the designated router (DR). Default Format Mode 1 ipv6 pim dr-priority Interface Config no ipv6 pim dr-priority Use this command to disable the interface from being the BSR border. Format Mode no ipv6 pim dr-priority Interface Config ipv6 pim join-prune-interval Use this command to configure the interface join/prune interval for the PIM-SM router. The join/prune interval is specified in seconds. This parameter can be configured to a value from 0 to 18000. Default 60 IPv6 Multicast Commands 446