Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 462
Quality of Service QoS Commands, ProSafe Managed Switch, specified as either an integer from 0 to 63
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
ProSafe Managed Switch Note: Commands you issue in the Interface Config mode only affect a single interface. Commands you issue in the Global Config mode affect all interfaces. classofservice dot1p-mapping This command maps an 802.1p priority to an internal traffic class. The values can range from 0-7. The values range from 0-6, although the actual number of available traffic classes depends on the platform. For more information about 802.1p priority, see Voice VLAN Commands on page 80. Format Modes classofservice dot1p-mapping • Global Config • Interface Config no classofservice dot1p-mapping This command maps each 802.1p priority to its default internal traffic class value. Format Modes no classofservice dot1p-mapping • Global Config • Interface Config classofservice ip-dscp-mapping This command maps an IP DSCP value to an internal traffic class. The value is specified as either an integer from 0 to 63, or symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef. The values can range from 0-6, although the actual number of available traffic classes depends on the platform. Format Modes classofservice ip-dscp-mapping Global Config no classofservice ip-dscp-mapping This command maps each IP DSCP value to its default internal traffic class value. Format Modes no classofservice ip-dscp-mapping Global Config Quality of Service (QoS) Commands 462