Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 356
ip pim ssm, ip pim-trapflags, show ip pim
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 356 highlights
ProSafe Managed Switch ip pim ssm Use this command to define the Source Specific Multicast (SSM) range of IP multicast addresses. Default Format Mode disabled ip pim ssm {default | } Global Config Parameter default-range Description Defines the SSM range access list to 232/8. no ip pim ssm This command is used to disable the Source Specific Multicast (SSM) range. Format Mode no ip pim ssm {default | } Global Config ip pim-trapflags This command enables the PIM trap mode for both Sparse Mode (SM) and Dense Mode. (DM). Default Format Mode disabled ip pim-trapflags Global Config no ip pim-trapflags This command sets the PIM trap mode to the default. Format Mode no ip pim-trapflags Global Config show ip pim This command displays the system-wide information for PIM (global configuration mode and interface status). Format Modes show ip pim Privileged EXEC IP Multicast Commands 356