Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 394
not specify an interface, the command displays information about traffic on all interfaces., loopback
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
ProSafe Managed Switch Column Headings Logical Interface IPv6 Address/Prefix Length Definition The interface in unit/slot/port format that is associated with the VLAN ID. The IPv6 prefix and prefix length associated with the VLAN ID. show ipv6 traffic Use this command to show traffic and statistics for IPv6 and ICMPv6. Specify a logical, loopback, or tunnel interface to view information about traffic on a specific interface. If you do not specify an interface, the command displays information about traffic on all interfaces. Format Mode show ipv6 traffic [{ | loopback | tunnel }] Privileged EXEC Term Definition Total Datagrams Received Total number of input datagrams received by the interface, including those received in error. Received Datagrams Locally Delivered Total number of datagrams successfully delivered to IPv6 user-protocols (including ICMP). This counter increments at the interface to which these datagrams were addressed, which might not necessarily be the input interface for some of the datagrams. Received Datagrams Discarded Due To Header Errors Number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IPv6 options, etc. Received Datagrams Discarded Due To MTU Number of input datagrams that could not be forwarded because their size exceeded the link MTU of outgoing interface. Received Datagrams Discarded Due To No Route Number of input datagrams discarded because no route could be found to transmit them to their destination. Received Datagrams With Unknown Protocol Number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. This counter increments at the interface to which these datagrams were addressed, which might not be necessarily the input interface for some of the datagrams. Received Datagrams Discarded Due To Invalid Address Number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (for example, ::0) and unsupported addresses (for example, addresses with unallocated prefixes). Forentities which are not IPv6 routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Received Datagrams Discarded Due To Truncated Data Number of input datagrams discarded because datagram frame didn't carry enough data. IPv6 Commands 394