Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 625

ProSafe Managed Switch the DTP packets on the interface. Use blockudld to filter the UDLD packets on the interface. Use blockpagp to filter the PAGP packets on the interface. Use blocksstp to filter the SSTP packets on the interface. Format Mode Default llpf {blockisdp | blockvtp | blockdtp | blockudld | blockpagp | blocksstp | blockall } Interface Config Disable no llpf Use this command to unblock LLPF protocol(s) on a port. show llpf interface all Use this command to display the status of LLPF rules configured on a particular port or on all ports. Format Mode show llpf interface [all | unit/slot/port] Privileged EXEC Term Block ISDP Block VTP Block DTP Block UDLD Block PAGP Block SSTP Block All Definition Shows whether the port blocks ISDP PDUs. Shows whether the port blocks VTP PDUs. Shows whether the port blocks DTP PDUs. Shows whether the port blocks UDLD PDUs. Shows whether the port blocks PAGP PDUs. Shows whether the port blocks SSTP PDUs. Shows whether the port blocks all proprietary PDUs available for the LLDP feature. RMON Stats and History Commands The various MIBs within RFC 2819, 3273, and 3434 are arranged into groups. The managed switch supports some of the groups in these RFCs but not all. The managed switch complies with MODULE-COMPLIANCE and OBJECT-GROUP definitions within these RFCs for supporting individual groups. The managed switch supports the following groups: Utility Commands 625