Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 752

ProSafe Managed Switch Format Mode name Captive Portal Instance mode no name Use this command to remove a configuration name. Format Mode no name Captive Portal Instance mode protocol Use this command to configure the protocol mode for a captive portal configuration. The default protocol is http. Default Format Mode http protocol { http | https } Captive Portal Instance mode verification Use this command to configure the verification mode for a captive portal configuration. User verification can be configured to allow access for guest users; users that do not have assigned user names and passwords. User verification can also be configured to allow access for authenticated users. Authenticated users are required to enter a valid user name and password that must first be validated against the local database or a RADIUS server. Network access is granted once user verification has been confirmed. Default Format Mode guest verification { guest | local | radius } Captive Portal Instance mode group Use this command to configure a group ID for this captive portal configuration. If a group number is configured, the user entry (Local or RADIUS) must be configured with the same name and the group to authenticate to this captive portal instance. The group ID must be assigned first. If it isn't, use the user group command to create the group ID. The default group ID is 1 for a captive portal configuration. Default Format Mode 1 group Captive Portal Instance mode Captive Portal Commands 752