Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 234
mvr querytime, mvr vlan, mvr immediate, no mvr mode
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
ProSafe Managed Switch no mvr mode This command sets the mode type to the default value. Format Mode no mvr mode Global Config mvr querytime This command sets the MVR query response time. Format Mode Default mvr querytime Global Config 5 no mvr querytime This command sets the MVR query response time to the default value. Format Mode no mvr querytime Global Config mvr vlan This command sets the MVR multicast VLAN. Format Mode Default mvr vlan Global Config 1 no mvr vlan This command sets the MVR multicast VLAN to the default value. Format Mode no mvr vlan Global Config mvr immediate This command enables MVR immediate leave mode. MVR has two modes of operating with the IGMP Leave messages: normal leave and immediate leave: • In normal leave mode, when a leave is received, the general IGMP query is sent from a Layer 2 switch to the receiver port, where the leave was received. Then reports are Multicast VLAN Registration (MVR) 234