Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 66
vlan acceptframe, vlan ingressfilter
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ProSafe Managed Switch vlan acceptframe This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority frames received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification. Default Format Mode all vlan acceptframe {untaggedonly | vlanonly | all} Interface Config no vlan acceptframe This command resets the frame acceptance mode for the interface to the default value. Format Mode no vlan acceptframe Interface Config vlan ingressfilter This command enables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Default Format Mode disabled vlan ingressfilter Interface Config no vlan ingressfilter This command disables ingress filtering. If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN. Format Mode no vlan ingressfilter Interface Config Switching Commands 66