Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 299

ProSafe Managed Switch OSPF can operate more efficiently by treating the network as a point-to-point network. For point-to-point networks, OSPF does not elect a designated router or generate a network link state advertisement (LSA). Both endpoints of the link must be configured to operate in point-to-point mode. Default Format Mode broadcast ip ospf network {broadcast|point-to-point} Interface Config no ip ospf network Use this command to return the OSPF network type to the default. Format Mode no ip ospf network Interface Config ip ospf priority This command sets the OSPF priority for the specified router interface. The priority of the interface is a priority integer from 0 to 255. A value of 0 indicates that the router is not eligible to become the designated router on this network. Default Format Mode 1, which is the highest router priority ip ospf priority Interface Config no ip ospf priority This command sets the default OSPF priority for the specified router interface. Format Mode no ip ospf priority Interface Config ip ospf retransmit-interval This command sets the OSPF retransmit Interval for the specified interface. The retransmit interval is specified in seconds. The value for is the number of seconds between link-state advertisement retransmissions for adjacencies belonging to this router interface. This value is also used when retransmitting database description and link-state request packets. Valid values range from 0 to 3600 (1 hour). Default Format Mode 5 ip ospf retransmit-interval Interface Config Routing Commands 299