Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 559

ProSafe Managed Switch no logging traps This command resets the SNMP trap logging severity level to the default value. Format Mode no logging traps Global Config logging email test message-type This command sends an email to the SMTP server to test the email alerting function. Format Mode logging email test message-type {urgent |non-urgent |both} message-body Global Config show logging email config This command displays information about the email alert configuration. Format Mode show logging email config Privileged EXEC Term Definition Email Alert Logging The administrative status of the feature: enabled or disabled Email Alert From Address The email address of the sender (the switch). Email Alert Urgent Severity Level The lowest severity level that is considered urgent. Messages of this type are sent immediately. Email Alert Non Urgent Severity Level The lowest severity level that is considered non-urgent. Messages of this type, up to the urgent level, are collected and sent in a batch email. Log messages that are less severe are not sent in an email message at all. Email Alert Trap Severity Level The lowest severity level at which traps are logged. Email Alert Notification Period The amount of time to wait between non-urgent messages. Email Alert To Address Table The configured email recipients. Email Alert Subject Table The subject lines included in urgent (Type 1) and non-urgent (Type 2) messages. For Msg Type urgent, subject is The configured email subject for sending urgent messages. For Msg Type non-urgent, subject is The configured email subject for sending non-urgent messages. Utility Commands 559