Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 163
permit ip host mac host, show ip arp inspection, source mac validation, destination mac validation
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
ProSafe Managed Switch permit ip host mac host Use this command to configure a rule for a valid IP address and MAC address combination used in ARP packet validation. Format Mode permit ip host sender-ip mac host sender-mac ARP Access-list Config no permit ip host mac host Use this command to delete a rule for a valid IP and MAC combination. Format Mode no permit ip host sender-ip mac host sender-mac ARP Access-list Config show ip arp inspection Use this command to display the Dynamic ARP Inspection global configuration and configuration on all the VLANs. With the vlan-list argument (i.e. comma separated VLAN ranges), the command displays the global configuration and configuration on all the VLANs in the given VLAN list. The global configuration includes the source mac validation, destination mac validation and invalid IP validation information. Format Mode show ip arp inspection [vlan ] • Privileged EXEC • User EXEC Term Definition Source MAC Validation Displays whether Source MAC Validation of ARP frame is enabled or disabled. Destination MAC Validation Displays whether Destination MAC Validation is enabled or disabled. IP Address Validation Displays whether IP Address Validation is enabled or disabled. VLAN The VLAN ID for each displayed row. Configuration Displays whether DAI is enabled or disabled on the VLAN. Log Invalid Displays whether logging of invalid ARP packets is enabled on the VLAN. ACL Name The ARP ACL Name, if configured on the VLAN. Static Flag If the ARP ACL is configured static on the VLAN. Example: The following shows example CLI display output for the command. (Switch) #show ip arp inspection vlan 10-12 Switching Commands 163