Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 760
Captive Portal Commands, ProSafe Managed Switch, Group Name, Redirect URL, Session Timeout
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 760 highlights
ProSafe Managed Switch If the interface is specified, the following terms are displayed. Term Group Name Redirect URL Mode Redirect URL Session Timeout Idle Timeout Max Bandwidth Up Max Bandwidth Down Max Input Octets Max Output Octets Max Total Octets Definition The name of the group associated with this captive portal instance. The redirect mode for this captive portal instance The redirect URL is up to 512 characters. Logout once session timeout is reached (seconds). Logout once idle timeout is reached (seconds). Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send data into the network. Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive data from the network. Maximum number of octets the user is allowed to transmit.After this limit has been reached the user will be disconnected. Maximum number of octets the user is allowed to receive. After this limit has been reached the user will be disconnected. Maximum number of octets the user is allowed to transfer (sum of octets transmitted and received). After this limit has been reached the user will be disconnected. Example (switch)#show captive-portal configuration status CP ID CP Name Mode Protocol Verification 1 cp1 Enable https Guest 2 cp2 Enable http Local 3 cp3 Disable https Guest (switch)#show captive-portal configuration 1 status CP ID 1 CP Name cp1 Mode Enabled Protocol Mode https Verification Mode Guest Group Name group123 Redirect URL Mode Enabled Redirect URL www.cnn.com Session Timeout (seconds 86400 Idle Timeout (seconds 600 Max Bandwidth Up (bytes/sec 0 Max Bandwidth Down (bytes/sec 0 Max Input Octets (bytes 0 Max Output Octets (bytes 0 Max Total Octets (bytes 0 Captive Portal Commands 760