Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 386
IPv6 Commands, ProSafe Managed Switch, If you specify an interface
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 386 highlights
ProSafe Managed Switch show ipv6 interface Use this command to show the usability status of IPv6 interfaces and whether ICMPv6 Destination Unreachable messages may be sent. Format Mode show ipv6 interface {brief | |tunnel | loopback } Privileged EXEC If you use the brief parameter, the following information displays for all configured IPv6 interfaces: Term Definition Interface The interface in unit/slot/port format. IPv6 Routing Operational Mode Shows whether the mode is enabled or disabled. IPv6 Shows the IPv6 address and length on interfaces with IPv6 enabled. Address/Length If you specify an interface, the following information also appears. Term Definition IPv6 is enabled Appears if IPv6 is enabled on the interface. Routing Mode Shows whether IPv6 routing is enabled or disabled. Administrative Mode Shows whether the interface administrative mode is enabled or disabled. Bandwidth Shows bandwidth of the interface. Interface Maximum Transmission Unit The MTU size, in bytes. Router Duplicate Address Detection Transmits The number of consecutive duplicate address detection probes to transmit. Router Advertisement NS Interval The interval, in milliseconds, between router advertisements for advertised neighbor solicitations. Router Advertisement Shows the router lifetime value of the interface in router advertisements. Lifetime Router Advertisement Reachable Time The amount of time, in milliseconds, to consider a neighbor reachable after neighbor discovery confirmation. IPv6 Commands 386