Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 485

ProSafe Managed Switch Note: This command fails if any attributes within the policy definition exceed the capabilities of the interface. Once a policy is successfully attached to an interface, any attempt to change the policy definition, that would result in a violation of the interface capabilities, causes the policy change attempt to fail. Format Modes service-policy {in|out} • Global Config • Interface Config Note: Each interface can have one policy attached. no service-policy This command detaches a policy from an interface in the inbound direction. The parameter is the name of an existing DiffServ policy. Note: This command causes a service to remove its reference to the policy. This command effectively disables DiffServ on an interface in the inbound direction. There is no separate interface administrative 'mode' command for DiffServ. Format Modes no service-policy in • Global Config • Interface Config DiffServ Show Commands Use the DiffServ show commands to display configuration and status information for classes, policies, and services. You can display DiffServ information in summary or detailed formats. The status information is only shown when the DiffServ administrative mode is enabled. Quality of Service (QoS) Commands 485