Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 64
VLAN Commands, instance.
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
ProSafe Managed Switch Term Definition Spanning Tree Adminmode Enabled or disabled. Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE 802.1d) based upon the Force Protocol Version parameter. BPDU Guard Mode Enabled or disabled. BPDU Filter Mode Enabled or disabled. Configuration Name Identifier used to identify the configuration currently being used. Configuration Revision Level Identifier used to identify the configuration currently being used. Configuration Digest Key A generated Key used in the exchange of the BPDUs. Configuration Format Selector Specifies the version of the configuration format being used in the exchange of BPDUs. The default value is zero. MST Instances List of all multiple spanning tree instances configured on the switch. show spanning-tree vlan This command displays the association between a VLAN and a multiple spanning tree instance. The corresponds to an existing VLAN ID. Format Mode show spanning-tree vlan • Privileged EXEC • User EXEC Term Definition VLAN Identifier The VLANs associated with the selected MST instance. Associated Instance Identifier for the associated multiple spanning tree instance or "CST" if associated with the common and internal spanning tree. VLAN Commands This section describes the commands you use to configure VLAN settings. Switching Commands 64