Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 178

ProSafe Managed Switch set igmp querier query-interval Use this command to set the IGMP Querier Query Interval time. It is the amount of time in seconds that the switch waits before sending another general query. Default Format Mode disabled set igmp querier query-interval Global Config no set igmp querier query-interval Use this command to set the IGMP Querier Query Interval time to its default value. Format Mode no set igmp querier query-interval Global Config set igmp querier timer expiry Use this command to set the IGMP Querier timer expiration period. It is the time period that the switch remains in Non-Querier mode once it has discovered that there is a Multicast Querier in the network. Default Format Mode 60 seconds set igmp querier timer expiry Global Config no set igmp querier timer expiry Use this command to set the IGMP Querier timer expiration period to its default value. Format Mode no set igmp querier timer expiry Global Config set igmp querier version Use this command to set the IGMP version of the query that the snooping switch is going to send periodically. Default Format Mode 1 set igmp querier version Global Config Switching Commands 178