Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 171
set igmp mrouter interface, set igmp report-suppression, set igmp header-validation
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
ProSafe Managed Switch set igmp mrouter interface This command configures the interface as a multicast router interface. When configured as a multicast router interface, the interface is treated as a multicast router interface in all VLANs. Default Format Mode disabled set igmp mrouter interface Interface Config no set igmp mrouter interface This command disables the status of the interface as a statically configured multicast router interface. Format Mode no set igmp mrouter interface Interface Config set igmp report-suppression Use this command to suppress the IGMP reports on a given VLAN ID. In order to optimize the number of reports traversing the network with no added benefits, a Report Suppression mechanism is implemented. When more than one client responds to an MGMD query for the same Multicast Group address within the max-response-time, only the first response is forwarded to the query and others are suppressed at the switch. Default Format Mode Disabled set igmp report-suppression VLAN Config no set igmp report-suppression Use this command to restore the system default. Format Mode no set igmp report-suppression VLAN Config set igmp header-validation This command enables the validation of 3 igmp header fields TTL (Time To Live), ToS (Type of Service), and Router Alert options. The fields validated depend on the IGMP version being used. IGMPv1 - Only the TTL field is validated. IGMPv2 - TTL and Router Alert fields are validated. Switching Commands 171