Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 516
show iscsi, show iscsi sessions, This command is to reset the aging time to the default.
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
ProSafe Managed Switch Term time Definition The number in minutes a session is not active prior to it's removal. (Range: 1-43,200) no iscsi aging time This command is to reset the aging time to the default. Format Mode no iscsi aging time Global Config show iscsi This command displays the iSCSI settings. Format Mode show iscsi • Privileged EXEC • User EXEC Example: The following example displays the iSCSI settings. Console # show iscsi iSCSI enabled iSCSI vpt is 5, remark Session aging time: 60 min Maximum number of sessions is 256 iSCSI targets and TCP ports: TCP Port Target IP Address Name 860 3260 5000 30001 172.16.1.1 iqn.1993-11.com.disk-vendor:diskarrays.sn.45678.tape:sys1.xyz 30033 172.16.1.10 30033 172.16.1.25 show iscsi sessions The show iscsi sessions Privileged EXEC mode command displays the iSCSI sessions. Format Mode Default show iscsi sessions [detailed] • Privileged EXEC • User EXEC If not specified, sessions are displayed in short mode (not detailed) Quality of Service (QoS) Commands 516