Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 16

ProSafe Managed Switch Table 6 explains how to enter or exit each mode. Table 6. CLI Mode Access and Exit Command Mode Access Method Exit or Access Previous Mode User EXEC This is the first level of access. To exit, enter logout. Privileged EXEC From the User EXEC mode, enter To exit to the User EXEC mode, enter exit or enable. press Ctrl-Z. Global Config From the Privileged EXEC mode, To exit to the Privileged EXEC mode, enter exit, enter configure. or press Ctrl-Z. VLAN Config From the Privileged EXEC mode, To exit to the Privileged EXEC mode, enter exit, enter vlan database. or press Ctrl-Z. Interface Config From the Global Config mode, To exit to the Global Config mode, enter exit. To enter return to the Privileged EXEC mode, enter interface Ctrl-Z. or interface loopback or interface tunnel Line Config From the Global Config mode, enter lineconfig. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Policy-Map Config From the Global Config mode, enter policy-map in. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Policy-Class-Map From the Policy Map mode enter Config class. To exit to the Policy Map mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Class-Map Config From the Global Config mode, enter class-map, and specify the optional keyword ipv4 to specify the Layer 3 protocol for this class. See class-map on page 470 for more information. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Ipv6-Class-Map Config From the Global Config mode, enter class-map and specify the optional keyword ipv6 to specify the Layer 3 protocol for this class. See class-map on page 470 for more information. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Router OSPF Config From the Global Config mode, enter router ospf. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Router OSPFv3 Config From the Global Config mode, enter ipv6 router ospf. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Using the Command-Line Interface 16