Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 470
DiffServ Class Commands, diffserv, class-map
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
ProSafe Managed Switch diffserv This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is retained and can be changed, but it is not activated. When enabled, DiffServ services are activated. Format Mode diffserv Global Config no diffserv This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ configuration is retained and can be changed, but it is not activated. When enabled, DiffServ services are activated. Format Mode no diffserv Global Config DiffServ Class Commands Use the DiffServ class commands to define traffic classification. To classify traffic, you specify Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic (name, match criteria) This set of commands consists of class creation/deletion and matching, with the class match commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria are also known as class rules, with a class definition consisting of one or more rules to identify the traffic that belongs to the class. Note: Once you create a class match criterion for a class, you cannot change or delete the criterion. To change or delete a class match criterion, you must delete and re-create the entire class. The CLI command root is class-map. class-map This command defines a DiffServ class of type match-all. When used without any match condition, this command enters the class-map mode. The is a case sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing DiffServ class. Quality of Service (QoS) Commands 470