Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 309

ProSafe Managed Switch Number of Active Areas 3 (3 normal, 0 stub, 0 nssa) ABR Status Disable ASBR Status Disable Stub Router FALSE External LSDB Overflow FALSE External LSA Count 0 External LSA Checksum 0 AS_OPAQUE LSA Count 0 AS_OPAQUE LSA Checksum 0 LSAs Originated 0 LSAs Received 0 LSA Count 0 Maximum Number of LSAs 18200 LSA High Water Mark 0 Retransmit List Entries 9078 Maximum Number of Retransmit Entries........... 72800 Retransmit Entries High Water Mark 72849 show ip ospf abr This command displays the internal OSPF routing table entries to Area Border Routers (ABR). This command takes no options. Format Mode show ip ospf abr • Privileged EXEC • User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be either: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ip ospf area This command displays information about the area. The identifies the OSPF area that is being displayed. Format Modes show ip ospf area • Privileged EXEC • User EXEC Routing Commands 309