Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 747
Captive Portal Commands, Captive Portal Global Commands
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 747 highlights
14. Captive Portal Commands 14 The Captive Portal feature is a software implementation that blocks clients from accessing the network until user verification has been established. Verification can be configured to allow access for both guest and authenticated users. Authenticated users must be validated against a database of authorized Captive Portal users before access is granted. The Authentication server supports both HTTP and HTTPS web connections. In addition, Captive Portal can be configured to use an optional HTTP port (in support of HTTP Proxy networks). If configured, this additional port is then used exclusively by Captive Portal. Note that this optional port is in addition to the standard HTTP port 80 which is currently being used for all other web traffic. This chapter contains the following sections: • Captive Portal Global Commands • Captive Portal Configuration Commands • Captive Portal Status Commands • Captive Portal Client Connection Commands • Captive Portal Interface Commands • Captive Portal Local User Commands • Captive Portal User Group Commands Captive Portal Global Commands The commands in this section are related to Captive Portal Global configurations. captive-portal Use this command to enter the captive portal configuration mode. Format Mode captive-portal Global Configuration mode 747