Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 585
option, ip dhcp excluded-address, no next-server, no option
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 585 highlights
ProSafe Managed Switch Format Mode next-server DHCP Pool Config no next-server This command removes the boot server list. Format Mode no next-server DHCP Pool Config option The option command configures DHCP Server options. The parameter specifies the DHCP option code and ranges from 1-254. The parameter specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. The hex parameter specifies hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22 0c). Default Format Mode none option {ascii string | hex [...] | ip [...]} DHCP Pool Config no option This command removes the DHCP Server options. The parameter specifies the DHCP option code. Format Mode no option DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none ip dhcp excluded-address [highaddress] Global Config Utility Commands 585