Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 511
show auto-voip interface, no auto-voip protocol-based {remark | traffic-class}
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 511 highlights
ProSafe Managed Switch Note: The administrator has to enable tagging on auto-VoIP-enabled ports to remark the voice data when it is egressed. Format Mode Default auto-voip protocol-based {remark | traffic-class } • Global Config • Interface Config Traffic-class 7 no auto-voip protocol-based {remark | traffic-class} This command is used to set the traffic-class to the default value. Format Mode no auto-voip protocol-based {remark | traffic-class } • Global Config • Interface Config show auto-voip interface This command shows the configuration of the auto-voip per port. Format Mode show auto-voip interface [oui-based|protocol-based] { | all} • Privileged EXEC • User EXEC Example 1: If the configured auto-VoIP mode is protocol-based and the traffic-class is configured. Auto VoIP VLAN: 2 Interface Admin Auto VoIP Traffic Class Mode Mode 0/1 Enabled protocol-based 7 Example 2: If the configured auto-VoIP mode is OUI-based. Auto VoIP VLAN: 2 Auto VoIP OUI Priority: 7 Interface Admin Auto VoIP Mode Mode 0/1 Enabled oui-based Quality of Service (QoS) Commands 511