Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 627
rmon alarm
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 627 highlights
ProSafe Managed Switch rmon alarm This command sets the RMON alarm entry in the RMON alarm MIB group. Format Mode rmon alarm alarm number variable sample interval sampling type rising-threshold value falling-threshold value startup rising/falling/rising-falling owner string Global Config Parameter Description Alarm Number The Alarm number which identifies an Alarm. Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of integer. Sample Interval The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. The range is 0 to 2147483647. The default is 0. Alarm Sample Type The alarm sample type. The method of sampling the selected variable and calculating the value to be compared against thresholds. Possible types are Absolute or Delta. Alarm Rising Threshold Value The alarm rising threshold for the sample statistics. Alarm Falling Threshold Value The alarm falling threshold for the sample statistics. Alarm Startup Alarm The alarm that may be sent. Possible values are Rising Alarm, Falling Alarm or both. Alarm Owner string The alarm owner. The owner string associated with the alarm entry. no rmon alarm This command deletes the rmon alarm entry. Format Mode no rmon alarm Global Config rmon hcalarm This command sets the rmon hcalarm entry in the High Capacity RMON alarm mib group. Format Mode rmon hcalarm rising-threshold high low falling-threshold high low startup owner Global Config Utility Commands 627