Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 683

ProSafe Managed Switch Parameter password encrypted Definition Password for this level. Range: 8-64 characters. Encrypted password to be entered, copied from another switch configuration. no password(AAA IAS User Configuration) Use this command to remove a password for a user in the IAS database. Format Mode no password AAA IAS User Config clear aaa ias-users Use this command to remove all users from the IAS database. Format Mode clear aaa ias-users Privileged EXEC show aaa ias-users Use this command to display configured IAS users and their attributes. Passwords configured are not shown in the show command output. Format Mode show aaa ias-users Privileged EXEC SNMP Commands This section describes the commands you use to configure Simple Network Management Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can communicate with SNMP managers on your network. snmp-server Use this command to set the name and the physical location of the switch and the organization responsible for the network. The range for , and is from 1 to 31 alphanumeric characters. Default Format Mode none snmp-server {sysname | location | contact } Global Config Management Commands 683