Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 292

ProSafe Managed Switch no bandwidth Use this command to set the interface bandwidth to its default value. Format Mode no bandwidth Interface Config capability opaque Use this command to enable Opaque Capability on the Router. The information contained in Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to distribute information throughout the OSPF domain. The 7000 series supports the storing and flooding of Opaque LSAs of different scopes. Default Format Mode disabled capability opaque Router OSPF Config no capability opaque Use this command to disable opaque capability on the router. Format Mode no capability opaque Router OSPF Config clear ip ospf Use this command to disable and re-enable OSPF. Format Mode clear ip ospf Privileged EXEC clear ip ospf configuration Use this command to reset the OSPF configuration to factory defaults. Format Mode clear ip ospf configuration Privileged EXEC clear ip ospf counters Use this command to reset global and interface statistics. Format Mode clear ip ospf counters Privileged EXEC Routing Commands 292