Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 237
show mvr interface, Multicast VLAN Registration MVR, ProSafe Managed Switch
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
ProSafe Managed Switch The following table describes the output parameters. Term MVR Group IP Status Members Definition MVR group multicast IP address. The status of the specific MVR group. It can be active or inactive. The list of ports that participates in the specified MVR group. Example: (switch)#show mvr members MVR Group IP Status 224.1.1.1 INACTIVE Members 1/0/1, 1/0/2, 1/0/3 (switch)#show mvr members 224.1.1.1 MVR Group IP Status 224.1.1.1 INACTIVE Members 1/0/1, 1/0/2, 1/0/3 show mvr interface This command displays the MVR-enabled interfaces configuration. Format Mode show mvr interface [ [members [vlan ]] ] Privileged EXEC The following table explains the output parameters. Parameter Port Type Status Immediate Leave Description Interface number The MVR port type. It can be none, receiver, or source type. The interface status. It consists of two characteristics: • active or inactive indicates whether the port is forwarding. • inVLAN or notInVLAN indicates whether the port is part of any VLAN. The state of immediate mode. It can be enabled or disabled. Example: (switch)#show mvr interface Port Type 1/0/9 RECEIVER Status Immediate Leave ACTIVE/inVLAN DISABLED Multicast VLAN Registration (MVR) 237