Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 96
Port-Based Network Access Control Commands, Format, Mac Address, Description, Interfaces
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
ProSafe Managed Switch Term Definition LeaveAll Timer This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000 centiseconds (10 seconds). Port GMRP Mode The GMRP administrative mode for the port. It may be enabled or disabled. If this parameter is disabled, Join Time, Leave Time and Leave All Time have no effect. show mac-address-table gmrp This command displays the GMRP entries in the Multicast Forwarding Database (MFDB) table. Format Mode show mac-address-table gmrp Privileged EXEC Term Mac Address Type Description Interfaces Definition A unicast MAC address for which the switch has forwarding and or filtering information. The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address is displayed as 8 bytes. The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are added to the table as a result of a learning process or protocol. The text description of this multicast table entry. The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:). Port-Based Network Access Control Commands This section describes the commands you use to configure port-based network access control (802.1x). Port-based network access control allows you to permit access to network services only to and devices that are authorized and authenticated. clear dot1x statistics This command resets the 802.1x statistics for the specified port or for all ports. Format Mode clear dot1x statistics { | all} Privileged EXEC Switching Commands 96