Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 286

ProSafe Managed Switch of candidate causes the router to participate in the translator election process when it attains border router status. Format Mode area nssa translator-role {always | candidate} Router OSPF Config no area nssa translator-role (OSPF) This command disables the nssa translator role from the specified area id. Format Mode no area nssa translator-role {always | candidate} Router OSPF Config area nssa translator-stab-intv (OSPF) This command configures the translator of the NSSA. The is the period of time that an elected translator continues to perform its duties after it determines that its translator status has been deposed by another router. Format Mode area nssa translator-stab-intv Router OSPF Config no area nssa translator-stab-intv (OSPF) This command disables the nssa translator's from the specified area id. Format Mode no area nssa translator-stab-intv Router OSPF Config area range (OSPF) Use this command in Router Configuration mode to configure a summary prefix that an area border router advertises for a specific area. Default Format Mode No area ranges are configured by default. No cost is configured by default. area areaid range prefix netmask {summarylink | nssaexternallink} [advertise | not-advertise] [cost cost] OSPFv2 Router Configuration Parameter area-id prefix netmask Description The area identifier for the area whose networks are to be summarized. The summary prefix to be advertised when the ABR computes a route to one or more networks within this prefix in this area. Routing Commands 286