Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 574
sntp unicast client poll-retry, sntp server, clock timezone
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 574 highlights
ProSafe Managed Switch Format Mode sntp unicast client poll-timeout Global Config no sntp unicast client poll-timeout This command will reset the poll timeout for SNTP unicast clients to its default value. Format Mode no sntp unicast client poll-timeout Global Config sntp unicast client poll-retry This command will set the poll retry for SNTP unicast clients to a value from 0 to 10. Default Format Mode 1 sntp unicast client poll-retry Global Config no sntp unicast client poll-retry This command will reset the poll retry for SNTP unicast clients to its default value. Format Mode no sntp unicast client poll-retry Global Config sntp server This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535. Format Mode sntp server [ [ []]] Global Config no sntp server This command deletes an server from the configured SNTP servers. Format Mode no sntp server remove Global Config clock timezone When using SNTP/NTP time servers to update the switch's clock, the time data received from the server is based on Coordinated Universal Time (UTC) which is the same as Greenwich Utility Commands 574