Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 70
vlan port tagging all, vlan protocol group
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
ProSafe Managed Switch vlan port tagging all This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number. Format Mode vlan port tagging all Global Config no vlan port tagging all This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number. Format Mode no vlan port tagging all Global Config vlan protocol group This command adds protocol-based VLAN groups to the system. When it is created, the protocol group will be assigned a unique number (1-128) that will be used to identify the group in subsequent commands. Format Mode vlan protocol group Global Config no vlan protocol group This command removes a protocol group. Format Mode no vlan protocol group Global Config vlan protocol group name This command assigns a name to a protocol-based VLAN groups. The groupname variable can be a character string of 0 to 16 characters. Format Mode vlan protocol group name Global Config Switching Commands 70