Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 581
dns-server, hardware-address
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 581 highlights
ProSafe Managed Switch Format Mode default-router [....] DHCP Pool Config no default-router This command removes the default router list. Format Mode no default-router DHCP Pool Config dns-server This command specifies the IP servers available to a DHCP client. Address parameters are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none dns-server [....] DHCP Pool Config no dns-server This command removes the DNS Server list. Format Mode no dns-server DHCP Pool Config hardware-address This command specifies the hardware address of a DHCP client. Hardware-address is the MAC address of the hardware platform of the client consisting of 6 bytes in dotted hexadecimal format. Type indicates the protocol of the hardware platform. It is 1 for 10 MB Ethernet and 6 for IEEE 802. Default Format Mode ethernet hardware-address DHCP Pool Config no hardware-address This command removes the hardware address of the DHCP client. Format Mode no hardware-address DHCP Pool Config Utility Commands 581