Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 354
ip pim dr-priority, ip pim join-prune-interval, ip pim rp-address, no ip pim bsr-candidate
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
ProSafe Managed Switch no ip pim bsr-candidate This command is used to disable the router to announce its candidacy as a bootstrap router (BSR). Format Mode no ip pim bsr-candidate interface [vlan | ] Global Config ip pim dr-priority Use this command to set the priority value for which a router is elected as the designated router (DR). Default Format Mode 1 ip pim dr-priority Interface Config no ip pim dr-priority Use this command to disable the interface from being the BSR border. Format Mode no ip pim dr-priority Interface Config ip pim join-prune-interval This command is used to configure the interface join/prune interval for the PIM router. The join/prune interval is specified in seconds. This parameter can be configured to a value from 0 to 18000. Default Format Mode 60 ip pim join-prune-interval Interface Config no ip pim join-prune-interval Use this command to set the join/prune interval to the default value. Format Mode no ip pim join-prune-interval Interface Config ip pim rp-address This command is used to statically configure the RP address for one or more multicast groups. The parameter is the IP address of the RP. The parameter IP Multicast Commands 354