Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 352

ProSafe Managed Switch Join Prune Interval (secs) 60 DR Priority NA BSR Border Disabled Neighbor Count 1 Designated Router NA show ip pim neighbor This command displays the neighbor information for PIM on the specified interface. Format Modes show ip pim neighbor Privileged EXEC Term Neighbor Address Interface UpTime Expiry Time DR Priority Definition The IP address of the PIM neighbor. Interface number. Valid slot and port number separated by forward slashes. The time since this neighbor has become active on this interface. Time remaining for the neighbor to expire. DR Priority configured on this Interface [ PIM -SM only ]. (Switch) #show ip pim neighbor 1/0/1 Neighbor Addr Interface Uptime Expiry Time DR (hh:mm:ss) (hh:mm:ss) Priority 192.168.10.2 1/0/1 00:02:55 00:01:15 NA (Switch) #show ip pim neighbor Neighbor Addr Interface Uptime Expiry Time DR (hh:mm:ss) (hh:mm:ss) Priority 192.168.10.2 1/0/1 00:02:55 00:01:15 1 192.168.20.2 1/0/2 00:03:50 00:02:10 1 ip pim sparse(Global Config) This command is used to administratively enable PIM Sparse Mode (PIM-SM) multicast routing mode on the router. Default Format Mode disabled ip pim sparse Global Config IP Multicast Commands 352