Netgear M5300-52G3 Command Line Interface (CLI) User Manual - Page 657
ip https authentication, ip http secure-port
View all Netgear M5300-52G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 657 highlights
ProSafe Managed Switch ip https authentication Use this command to specify the authentication methods for http server users. The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. If none is specified as an authentication method after radius, no authentication is used if the radius server is down. Format Mode ip https authentication method1 [method2 ...] Global ConfigC Term Local Radius Tacacs None Definition Uses the local username database for authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS servers for authentication. Uses no authentication. no ip https authentication Use this command to restore the authentication methods to the default for http server users. Format Mode no ip https authentication method1 [method2 ...] Global Config ip http secure-port Use this command to set the SSL port where port can be 1-65535 and the default is port 443. Default Format Mode 443 ip http secure-port Privileged EXEC no ip http secure-port Use this command to reset the SSL port to the default value. Format Mode no ip http secure-port Privileged EXEC Management Commands 657