Ricoh 3045 User Instructions - Page 111

Printing Options Limitation ❒ This function does not work with documents larger than A5K, B5 JISK, A4K, 81/2"×11"K or 81/2"×51/2"K. When A5K, B5 JISK, A4K, 81/2"×11"K or 81/2"×51/2"K size paper is loaded in the machine, each page of the received document is printed on a single sheet. When A5L, B5 JISL, A4L, 81/2"×11"L or 81/2"×51/2"L size paper is loaded in the machine, each page of the received document is rotated and printed on a single sheet. ❒ If paper matching the size and orientation of a received document is available, Combine Two Originals is not possible. ❒ If Combine Two Originals and 2 Sided Print are selected at the same time, 2 Sided Print takes priority and Combine Two Originals is canceled. Note ❒ You can turn this function on or off with the User Parameters. See p.167 "User Parameters" (switch 10, bit 1). ❒ This function uses Memory Reception. Page Separation and Length Reduction If the size of a received document is longer than the paper loaded in the machine, each page of the document can be split and printed on several sheets, or reduced and printed on a single sheet. For example, this func- tion splits the document if the docu- ment length is 20 mm (0.79") or longer than the paper used. The document is reduced if it is less than 20 mm (0.79"). When a document is split, an asterisk (*) is inserted at the split position and about 10 mm (0.39") of the split area is duplicated on the top of the second sheet. 5 Note ❒ Your service representative can cus- tomize this function with the following settings: • Reduction • Print split mark • Overprinting • Overprinting length • Guideline for split ❒ You can adjust the overprinting and reduction lengths within the following ranges: • Overprinting length: 4 mm (0.16"), 10 mm (0.39"), 15 mm (0.59") • Guideline for split: 5-155 mm (5 mm steps)/0.2-6.1" (0.2" steps) 101