Ricoh 3045 User Instructions - Page 70

Other Transmission Features Changing the Line Port The optional extra G3 interface unit is required. When the extra G3 interface unit is in- ❖ Multi-port stalled, you can connect to a maxi- When the extra G3 interface unit is mum of three ports. installed, communications can Note ❒ When you install the extra G3 interface unit, you can specify the line port home position from "Gen. Settings/ Adjust". See p.145 "Gen- take place simultaneously through three lines at once. The following list shows protocol combinations available for each line type. 4 eral Settings/Adjustment". ❒ When sending a fax, you can select the line port if dialing with the number keys or Chain Dial. Option Without option Available Available line types protocol combinations PSTN G3 ❖ G3 G3 is selected after power up or when the machine is reset. If you install the extra G3 interface unit, you can select "G3-1", "G3-2", "G3-3", or "G3 Auto"depending on the number of the installed unit. Extra G3 interface unit Extra G3 interface unit + Extra G3 interface unit PSTN+ PSTN PSTN + PSTN + PSTN G3+G3 G3 + G3 + G3 Note ❒ A maximum of three simultaneous communications are possible. You cannot perform three Immediate Transmissions simultaneously. ❒ If three communications are in progress, the display shows the first communication that was initiated 60