Ricoh 3045 User Instructions - Page 23

Polling Transmission F Press [OK]. "pppppppppp" appears. Polling Transmission Clear Report The type of Polling Transmission is shown above the highlighted [Poll- This report allows you to verify Polling Transmission has taken place. 1 ing TX]. If E-mail TX Results is programmed G Press [OK]. in a Quick Operation key, you can have the report e-mail sent after transmission. Note See p.146 "Quick Operation Key". ❒ To check the settings, press [Transmission Mode]. H Press the {Start} key. Limitation ❒ This report is not printed if the User Parameters are set to allow Note ❒ You can cancel the transmission the stored originals to be repeatedly sent (Save). See p.167 "User Parameters" (switch 11, bit 7). setup for Polling Transmission. See p.19 "Canceling a Transmis- Note sion". ❒ You can turn this function on or off with the User Parameters. See p.167 "User Parameters" (switch 03, bit 6). ❒ You can have a portion of the sent image printed on the report with the User Parameters. See p.167 "User Parameters" (switch 04, bit 7). ❒ You can check the result of Polling Transmission with the Journal. See p.27 "Printing the Journal" ❒ To view the report without text disruption, select a font of even character width in your e-mail application's settings. ❒ You can display a destination with the User Parameters. See p.167 "User Parameters" (switch 04, bit 4). ❒ You can indicate the sender's name with the User Parameters. See p.167 "User Parameters" (switch 04, bit 5). 13