Ricoh 3045 User Instructions - Page 16
Confirm the selected sender, and then, press, Select, for the Stamp, Sender Name., for the Stamp
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Transmission Mode Note ❒ If a destination protection code is set, the entry screen appears. Enter the protection code for 1 destination using the number keys, and then press [OK]. E Confirm the selected sender, and then press [OK]. F Select [On] or [Off] for the Stamp Sender Name. Confirming transmission results by e-mail If the sender's e-mail address is registered you can specify whether or not to send the transmission result by e-mail to the sender. If you enable this function, the transmission result is sent to the registered mail address. Note ❒ If a user logs in with User ID, the transmission result is sent by e-mail to the logged-in user. ❒ You can confirm transmission results by using both the E-mail TX Results function, which sends the results by e-mail, and the Communication Result Report printed by the machine. You can set whether to use both of these together in User Parameters. See p.167 "User Parameters" (switch 10, bit 6). A Select [Yes] or [No] for the Email TX Results function. Printing on the Receiver's Sheet If you enable this function, the sender's name (user name) appears on the receiver's sheet, lists, and report. A Select [On] for the Stamp Send- er Name function. 6