Ricoh 3045 User Instructions - Page 22
Depending on the Polling Trans
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Transmission Mode ❒ Polling Transmission Clear Report allows you to verify Polling Trans- mission has taken place. See p.13 "Polling Transmission Clear Re- 1 port". ❒ You can program one of the Quick Operation keys with operations for this function. Using this key allows you to omit step B. See p.145 "Gen- eral Settings/Adjustment". ❒ The communication fee is charged to the receiver. A Place the original, and then select the scan settings you require. Reference p.15 "Placing Originals", Facsimile Reference p.34 "Scan Settings", Facsimile Reference B Press [Transmission Mode]. Free Polling Transmission A Check that [Free Polling TX] is selected. Default ID Transmission A Select [Default ID TX]. ID Override Transmission A Select [ID Override Transmission]. B Specify a 4-digit ID using the number keys and [A], [B], [C], [D], [E], and [F]. C Press [Polling TX]. D Depending on the Polling Trans- mission mode, use one of the following procedures: 12 Note ❒ A Polling ID may be any four numbers (0 to 9) and characters (A to F), except 0000 and FFFF. ❒ If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again. E Press [Only Once] or [Save] to delete or save the file after transmission. Note ❒ To delete the original immedi- ately after transmission, select [Only Once]. ❒ To repeatedly send the original, select [Save]. ❒ To cancel Polling Transmission, press [Cancel]. The display returns to that of step C.