Ricoh 3045 User Instructions - Page 156

Facsimile Features ❖ TX Stamp Priority ❖ Quick Operation Key Use this function to press a TX stamp. Frequently used functions pro- • On • Off grammed as Quick Operation keys are shown on the menu immediately after the power is turned on. ❖ Line Priority Setting Use this function to specify the line to be used. Note ❒ The display may differ depend- ing on the line type you have. The Quick Operation keys can be programmed with the following functions: • Journal • TX File Status (Transmission File Status) • Print Conf. RX (Print Confiden- ❖ Program Economy Time tial Reception) Use this function for specifying a • Print Memory Lock time for transmission when call charges are low. See p.3 "Sending at a Specific Time (Send Later)". • Stored File • Send Later Limitation ❒ You can program only one Economy Time. • Auto Document • 2 Sided Original • Closed Network Note ❒ If you make a mistake, press [Clear] or the {Clear/Stop} key be- • Polling TX (Polling Transmission) • Polling RX (Polling Reception) • Fax Header Print fore pressing [OK], and then try • Label Insertion 8 again. • RX File Status (Reception File ❖ On Hook Mode Release Time Status) Use this function to specify a time • Forwarding to cancel On Hook mode after you transmit using On Hook dialing. • 1 minute • Transfer Request • Switch RX Mode (Reception Mode Switch) • 3 minutes • Manual E-mail RX • 5 minutes (when the Internet Fax is set to • 10 minutes ON.) • TX Status Report (Transmission Status Report) • Sender Settings • E-mail TX Results (E-mail Transmission Results) Up to three functions can be programmed to a Quick Operation keys. 146