Ricoh 3045 User Instructions - Page 160

Facsimile Features IP-Fax Settings Make settings to use IP-Fax. Set H.323 for the gatekeeper, SIP for SIP server, and gateway for gateway access if necessary. Check the settings of the network to which this machine is connected before making settings. Note ❒ The following characters can be used for registration of the alias telephone number in H.323 Setting. Make sure you enter these characters correctly: • Numbers • Symbols (# and *) ❒ The following characters can be used for registration of the SIP User Name in SIP Settings. Make sure you enter these characters correctly: • Alphanumeric symbols (lower and upper cases) 8 • The 21 symbols in the following table. ; ? : & = + $ , - _ . ! ~ * # ' ( ) % / @ ❒ Use numbers and periods (".") to enter the correct IP addresses for the gatekeeper, SIP server, and gateway. You can get the correct IP addresses from the network administrator. ❖ Enable H.323 Specify whether or not H.323 is used for IP-Fax transmission. • On • Off 150 ❖ Enable SIP Specify whether or not SIP is used for IP-Fax transmission. • On • Off ❖ H.323 Settings Set the IP address and alias telephone number of the gatekeeper. For details, see p.151 "Configuring the H.323 gatekeeper". • Gatekeeper Address (Main) • Gatekeeper Address (Sub) • Own Fax No. ❖ SIP Settings Set the SIP server's IP address and SIP user name. For details, see p.151 "Configuring the SIP server". • Proxy Server Addr. (Main) • Proxy Server Address (Sub) • Redirect Svr. Addr. (Main) • Redirect Svr. Addr. (Sub) • Registrar Address (Main) • Registrar Address (Sub) • SIP User Name ❖ Program / Change / Delete Gateway Register, change, or delete the gateway used for transmission to IPFax. For details, see p.152 "Registering or changing a gateway" and p.153 "Deleting a gateway". • Program / Change (Prefix, Select Protocol, Gateway Address) • Delete