Ricoh 3045 User Instructions - Page 65

Advanced Features Destination List A Select [q Quick Dial]. B Enter the registration number of the destination list where the Receiving Station is stored. For example, to select the registration number stored in Quick Dial 01 of the Transfer Station, enter: {0} {1}. Note ❒ You can enter up to five digits. Speed Dial A Select [qp Speed Dial]. B Enter the number of the Speed Dial code. For example, to select the number stored in Speed Dial 12 of the Transfer Station, enter: {1} {2}. Group Dial A Select [qpp Group Dial]. B Enter the number of the Group number. For example, to select the number stored in Group Dial 04 of the Transfer Station, enter: {0} {4}. G To specify another Receiving Sta- tion, press [Add]. Note ❒ Press [UPrev.] or [TNext] to see the Receiving Stations already entered. You can select a Receiving Station from this list and remove it by pressing [Clear] or the {Clear/Stop} key. H When you have specified all the Receiving Stations, press [OK]. I Press [Exit]. The Transfer Stations and Receiving Stations are displayed. J Press the {Start} key. 4 With transfer requests set in the System Settings menu You can program a Destination key with Transfer Station and/or Receiving Station under Program/Change/Delete Transfer Request in the System Settings menu. See "Registering the Transfer Request", General Settings Guide. A Place the original, and then select the scan settings you require. Reference p.15 "Placing Originals", Facsimile Reference p.34 "Scan Settings", Facsimile Reference B Press the key programmed with Transfer Request. C Press the {Start} key. 55