HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a4978 - Page 66
Removing the DDS/Floppy Drive Bracket
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Changing Your Computer's Hardware Configuration DDS Drive Installation Figure 2-19 Removing the DDS/Floppy Drive Bracket Figure 2-20 4. Install the DDS drive into the bracket: the drive itself must be inserted into the DDS drive bracket, and secured by four Torx T-10 screws (two on each side). The DDS Drive Installed Into the DDS/Floppy Drive Bracket 5. Connect the power and ribbon cables to the DDS drive. 6. Slide the bracket, now containing the DDS drive, into the DDS drive bay. 66 Chapter 2
66
Chapter 2
Changing Your Computer’s Hardware Configuration
DDS Drive Installation
Figure 2-19
Removing the DDS/Floppy Drive Bracket
4.
Install the DDS drive into the bracket: the drive itself must be
inserted into the DDS drive bracket, and secured by four Torx T-10
screws (two on each side).
Figure 2-20
The DDS Drive Installed Into the DDS/Floppy Drive Bracket
5.
Connect the power and ribbon cables to the DDS drive.
6.
Slide the bracket, now containing the DDS drive, into the DDS drive
bay.