Pfaff creative 2140 Owner's Manual - Page 43
Threading, need'e
View all Pfaff creative 2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Machine Assistijnt 2-11 Changing the needle Removing the needle: Lower the presser foot and set the needle at its highest position. Slightly loosen set screw (B) of the needle and pull the needle out downwards. L H Replacing the needle: The flat side (A) of the needle must face to the rear. Insert the needle, pushing it up as far as it will go. Hold the needle and tighten set screw (B) firmly. Threading the twin need'e Replace the sewing needle with a twin needle. Swing the second spool holder up and lock. Place a spool of thread with an appropriate spool cap on it. During threading in the left threading slot, make sure that you pass one thread to the left and one thread to the right sides of the tension disk (B). Continue threading in the usual manner, making sure the threads do not become twisted together. Pull the right thread into the right thread guide and thread the right needle. Pull the left thread into the left thread guide and thread the left needle. It is not possible to use the automatic needle threader with a twin needle.