D-Link DMS-3130 User Manual - Page 100

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide Parameter New Box ID Description Select the new box ID for the Switch that is selected in the Current Unit ID field. The user may choose any number between 1 and 9 to identify the Switch in the switch stack. The fields that can be configured in Priority are described below: Parameter Current Unit ID New Priority Description Select the unit ID of the Switch in the stack. Enter the priority of the Switch stacking unit. The range is from 0 to 15. Click the Apply button to accept the changes made. Stacking Bandwidth This window is used to display and configure the stacking bandwidth settings. Physical stacking needs to be enabled and can be configured to support 4-port stacking configuration. ▪ With the 4-port-SFP28 stacking configuration, the DMS-3130-30TS/30PS will use only physical ports 27, 28, 29, and 30 for 4-port stacking for a full-duplex speed of up to 200 Gbps. NOTE: The stacking bandwidth must be configured before the Switch can be stacked with other Switches. To view the following window, click Management > Stacking > Stacking Bandwidth, as shown below: Figure 4-71 Stacking Bandwidth Window The fields that can be configured are described below: Parameter Stack Bandwidth Description Select the stacking bandwidth here: • 4-port-SFP28 - Specifies 4 SFP28 ports to be used for stacking. Click the Apply button to accept the changes made. 89