D-Link DMS-3130 User Manual - Page 19

DMS-3130 Series Multi-Gigabit L3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured in Management Interface are described below: Parameter State IPv4 Address Subnet Mask Gateway Description Description Select to enable or disable the state of the management interface here. Enter the IPv4 address for this interface here. Enter the IPv4 subnet mask for this interface here. Enter the gateway IPv4 address for this interface here. Enter the description for the management interface here. This can be up to 64 characters long. Click the Apply button to accept the changes made. Peripheral Settings This window is used to display and configure the environment trap settings and environment temperature threshold settings. To view the following window, click System > Peripheral Settings, as shown below: Figure 3-3 Peripheral Settings Window The fields that can be configured in Environment Trap Settings are described below: Parameter Fan Trap Power Trap Temperature Trap Description Select to enable or disable the fan trap state for waning fan event (fan failed or fan recover). Select to enable or disable the power trap state for waning power event (power failed or power recover). Select to enable or disable the temperature trap state for warning temperature event (temperature thresholds exceeded or temperature recover). Click the Apply button to accept the changes made. The fields that can be configured in Environment Temperature Threshold Settings are described below: Parameter Unit Description Select the switch unit that will be used for this configuration here. This option is only available when stacking is enabled. 8